TiTan 150A sensorless Waterproof Brushless Speed Controller ESC for 1/8 1/5 RC Car Buggy
- Output: Continuous 150A, burst 950A.
- Input: 6-18 cells NiMH/NiCd or 2-6S LiPo.
- BEC: 6V/3A (Switch mode built-in BEC).
- Resistance: 0.00026 Ohm.
- Motor Supported: sensorless and sensored brushless motors.
- Suitable Motor:
When working with 4 cells Lipo: KV<=3000
When working with 6 cells Lipo: KV<=2400
（Note：The above KV number is the value of a 4274 sized motor (Diameter=42mm, Length=74mm).
-Suitable Car: 1/8, 1/5 On-road/Buggy/Truggy/Monster competition.
- Size: 60mm(L) * 51mm(W) * 40mm(H).
- Weight: 218g (Without wires).Features
-Water-proof and dust-proof for all-weather races.
(Note: please uninstall the cooling fan before using this ESC in water; Clean and dry it soon after the use for avoiding the connectors get rusty.)
- Compatible with all of sensorless and sensored brushless motors.
- Large current endurance.
- Excellent start-up, acceleration and linearity features.
- The built-in switching mode BEC has powerful output to supply all electronic equipments.
- Plenty of programmable items, suitable for various of chassis's, tires and racing tracks.
- Electric brake function, also compatible with mechanical disc-brake system.
- Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection.
- Internal timing can be changed easily to make the ESC suitable for various of motors.
- Easily programmed with the SET button,Multifunction LCD Program Boxand USB Link Software.
- ESC firmware can be updated through the USB adapter in the LCD Program Box .
- The major electronic components are sealed against splashing water and dust.
- These is a mounting stand for installing the ESC on chassis easily and firmly.
1x TiTan 150A brushless motor