• Supply 30A Brushless ESC + EMAX 1200KV Brushless +1045 Propeller  RC Airplane Tripcopter quadcopter


  • Supply New APM2.8 ATMEGA2560 Flight Controller + NEO-7M GPS Module + Crius Power Module


  • Supply APM2.8 APM2.6 Update Flight Controller & CRIUS NEO-7M GPS Module for Multicopter


  • Supply APM2.8 Flight Controller + CRIUS NEO-7M GPS Module&Bracket + Power Module APM2.6


  • Supply APM2.8 Flight Controller & Ublox NEO-6M GPS Module for Multirotor Quadcopter


  • Supply APM2.8 Flight Controller & Ublox NEO-6M GPS Module for Multirotor Quadcopter


  • Supply APM2.8 Flight Controller + NEO-7M GPS, 3DR 433Mhz Telemetry, OSD, Power Module


  • Supply APM2.8 Flight Controller + NEO-7M GPS, 3DR 915Mhz Telemetry, OSD, Power Module


  • Mini KK2.15 Multi-rotor LCD Flight Controller V1.9S & Protect Case KK2.0 KK2.1
    • images/v/201603/14592393080.png
    • images/v/201603/14592393081.png
    • images/v/201603/14592393092.png
    • images/v/201603/14592393093.png
  • Displaying 1/2

Mini KK2.15 Multi-rotor LCD Flight Controller V1.9S & Protect Case KK2.0 KK2.1

  • item#: 64156
  • Retail price: US$16.99
  • Price: 16.99

  • Start from: 1 Unit(s)
  • Weight: 0.1 Kg(s)
  • This item is:

  • US$16.99 + Shipping Cost
    Quantity: Unit(s)


    Mini KK2.15 Multi-rotor LCD Flight Controller V1.9S & Protect Case KK2.0 KK2.1

    The next evolution of the rotor revolution is here!! The KK-mini is packing all the same power, but with a new mighty-mini form factor.

    The KK-Mini is the next Big/Small evolution of the first generation KK flight control boards. The KK-Mini is based on the KK2.1.5 architecture and has all the same inputs and outputs as well as the full functionality of its big brother. The new 36mm designed was adapted to fit the needs of the new mini market, but don’t let its size fool you as it's just as much at home in any size multi-rotor. The KK mini still utilizes a built in GUI using a hi-res mini LCD and 4 micro buttons for the same great KK experience. It was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.

    A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!

    The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK-Mini is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.

    The KK-Mini added polarity protection to the voltage sense header and on-board buzzer. The voltage sense line has been updated for better accuracy.

    If you’re new to multi-rotor flight or have been unsure about how to setup a KK board, then the KK-Mini was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy.

    Size: 36x36x11.5mm (mounting holes 30.5x30.5mm)
    Weight: 8.6g
    IC: Atmega644 PA
    Gyro/Acc: 6050MPU InvenSense Inc.
    Auto-level: Yes
    Input Voltage: 4.8-6.0V
    AVR interface: standard 6 pin.
    Signal from Receiver: 1520us (5 channels)
    Signal to ESC: 1520us
    LCD size: 24*18mm
    Mini buttons size:Four 3.3*4.2mm
    Voltage sensor: One red positive pin header for.
    Input rail: Single row 2.54mm pitch pin header for input signal

    Firmware Version: 1.9S1:
    Pre-installed firmware.
    Quadcopter +
    Quadcopter X
    Hexcopter +
    Hexcopter X
    Octocopter +
    Octocopter X
    X8 +
    X8 X
    Aero 1S Aileron
    Aero 2S Aileron
    Flying Wing
    Singlecopter 2M 2S
    Singlecopter 1M 4S

    (Custom Mix via the "Mixer Editor" option)

    The Mixer Editor allows you to adjust where and how much signal the motors receive from stick input and sensors. This allows you to create any configuration possible with up to 8 motors or servos.

    Customer self-update function.
    Satellite input use Satellite-to-CPPM converter (#24524) at throttle channel(need steveis SW)
    Sbus input use SBUS-to-CPPM converter (#52185) at throttle channell(need steveis SW)

    Note: The KK-Mini uses the same firmware as the KK2.1~2.1.5 series

    Package Including:
    1 x Mini KK2.15 Flight Controller & protect case
    1 x Buzzer

    64156 MINI KK2.15  flighter controller.png

    64156 MINI KK2.15  flighter controller-2.png

    64156 MINI KK2.15  flighter controller-3.png

    64156 MINI KK2.15  flighter controller-4.png

    Write a Review:

    Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.

    Have any question or inquire for this item? Please contact Customer Service. (Our customer representative will get back shortly.)

      Indicates required fields*
      Your Name: *
      Enter your Reviewer Nickname
      Your Email: *
      Review Title: *

    Search Feedback

    • Did you find what you were looking for?
    • If you need help or have other feedback for Customer Service. Click here


    for the latest offers, discount and site activity!

    Online buy cheapest products direct from Chinese supply at rcmodelpart.com

    Join our community :
    rcmodelpart on Twitter rcmodelpart on Facebook rcmodelpart on YouTube


    Product Tags: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0-9 WishList

    Copyright © 2011 rcmodelpart.com. All Rights Reserved.