Hobbypower Racing 35A ESC Brushless Speed Controller for 1:12/14 RC Car V2
100% brand new
-Model :HobbyPower Brushless 35A ESC for RC Car & Truck (V2)
Cont. Current : 35A
Burst Current : 190A
Resistance : 0.0015 ohm
Suitable Car : 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race.
Suitable Brushless Motor : > 5.5T (3650 brushless motor)
Battery : 4 - 9 cells Ni-xx (NiMH or NiCd) or 2 - 3 Cells Li-Po.
(1) With 4-6 cells NiMH/NiCd or 2 cells Lipo: On-Road 9T, Off-Road 12T;
(2) With 6-9 cells NiMH/NiCd or 3 cells Lipo:On-Road 12T, Off-Road 18T;
BEC Output : 6V / 1.5A
Motor Type : Sensorless Brushless Motor
Dimension : 31.5mm(L) * 27.5mm(W) * 16mm(H).
Weight : 30g (without wire)
Compatible with all sensorless brushless motor.
Use top quality electronic components to enhance the current endurance ability of the ESC.
Excellent start-up, acceleration and linearity features.
With 3 running modes: Racing mode (Forward), Forward/Backward mode and Rock Crawler mode.
With 4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive" to suitable for different tracks.
Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
With 8 steps of timing adjustment to get the best compatibility with various of motors.
Easily program with only one button and compatible with pocket-sized program card.
The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).
Notice: this product compatible hobbywing program and software.
1x Hobbypower Racing 30A Brushless ESC